Quality Ductwork and Sheet Metal Products for the Heating, Ventilation, and Air-Conditioning Industry




Over a period of years we have had the pleasure of working with various air-conditioning engineers/contractors, and our quality and low cost has contributed to the satisfaction of those customers.

From steel to the insulation, we use quality materials only in our products and duct systems that comply with Australian Standards.

As by default we use 0.55 and 0.75 galvanized steel, which is dictated by the opening size of the duct up to 0.95/1.00mm.

Our insulation varies according to your needs, but rest assured we only use high quality Fibreglass and Polywool products from trusted Australian suppliers, such as perforated heavy weight foil faced internal insulation. If you require black scrim fiberglass,light density, no scrim, 5mm PE or any other type, no problems at all.

All internally insulated duct is capped off with steel capping on each end of the length, and connection frame corners are siliconed to minimise leakage. The frames (duct flange) can be either 25mm or the 35mm profile, depending on your preference with either bolt on connection or boltless being available.

If you require cushion heads/boxes and plenums of any sorts to suit your duct work, starting collars or even joiners, it can all be made and supplied.

You will find some quickly snapped images during work on some of our duct in the "Products/Duct Photos" page on the bottom of the green menu.